top of page
Decimator MD-Quad

Decimator MD-Quad

MD-QUAD Miniature (3G/HD/SD)-SDI Quad-Split / Multiviewer with (3G/HD/SD)-SDI and HDMI Outputs.


Professional 3G/HD/SD Test Pattern Generator featuring:

  • 26 Selectable Output Formats
  • 54 Test Patterns including Luma and Chroma Zone-plates


  • Audio Tone Generator
  • In Quad-Split mode the first 8-channels of audio from any input can now be passed to both the HDMI and SDI output
  • On-screen audio id pop-up when selection audio source in Quad-Split mode
  • On-screen display pop-up when using the rotary to allow for use when without a PC
  • Low cost miniature (3G/HD/SD)-SDI 4 to 1 Quad Split or 4 to 1 input multiplexer
  • Selectable output format in Quad-Split mode
  • Dynamic UMD and Tally support via RS422/485 pins on RJ45 connector
  • GPI on RJ-45 for remote switching and Tallies
  • Low latency buffering for each input allowing non-synchronous inputs
  • Linked (3G/HD/SD)-SDI and HDMI outputs
  • 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
    3G:SMPTE 424M@2.97 and 2.967Gb/s 1080p@60/59.94/50Hz
    HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s 1080i@60/59.94/50Hz
    SD:SMPTE 259M@270Mb/s 625i50
    MENU OPTIONS Input status for all 4 inputs
      Output format
      Output selection of Quad Split or input 1, 2, 3 or 4.
      Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
      Individual aspect format for each input of Same as output, Letter-box or Pillar-box
      Border Enable
      Quad split mode reference of either Free-run or input 1
    INPUTS Input Equalization > 100M using Belden 1694A
      USB for control and updates
      GPI on RJ-45
    OUTPUTS 1 x 10-bit (3G/HD/SD)-SDI Re-clocked
    LED STATUS Power
      4 x Signal lock and rate
    DIMENSIONS 90mm x 94mm x 23mm (3.5 x 3.7 x 0.9 inches)
    POWER +5V to +24V DC, 6 Watts
      Positive Centre Pin
bottom of page